User`s manual

MP-1xx H.323 User’s Manual 5. Configuring the MP-1xx
Version 4.4 89 March 2005
Table 5-19: Registration Prefixes Table
Parameter Description
Gatekeeper Registration Prefixes Enter the Gatekeeper Registration prefixes. These prefixes are used by
the VoIP gateway to register to a Gatekeeper.
When entering a prefix, you can create an entry that represents multiple
prefixes using the following notation:
n-m represents a range of numbers. For example, enter ‘250-279’ to
specify all prefixes from 250 to 279.
The Type of Number parameter is composed of two columns, Number
Plan and Number Type.
Select the H.225/Q.931 Number Plan assigned to this entry. You can
select Unknown [0], Private [9] or E.164 Public [1].
The default is Unknown.
Select the H.225/Q.931 Number Type assigned to this entry.
Note that the values available for the Number Type column are
determined according to the value selected in the Number Plan column.
• If you selected Unknown as the Number Plan, you can select
Unknown [0].
• If you selected Private as the Number Plan, you can select Unknown
[0], Level 2 Regional [1], Level 1 Regional [2], PISN Specific [3] or
Level 0 Regional (Local) [4].
• If you selected E.164 Public as the Number Plan, you can select
Unknown [0], International [1], National [2], Network Specific [3],
Subscriber [4] or Abbreviated [6].
The default is Unknown.
For a detailed list of the available NPI/TON values refer to Section
5.8.3.2
on page 71.
Type of Number
Note: The Type of Number information is used only if the gateway is
configured to register with PartyNumber Prefixes (GwRegistrType = 3 or
4).
Parameter Name in ini File Parameter Format
RegistrationPrefix
RegistrationPrefix = <Gatekeeper Registration Prefix>, <Number Plan>,
<Number Type>
For example:
RegistrationPrefix = 10,1,3.
Note 1: This parameter can appear up to 10 times.
Note 2: The registration prefixes can be entered as a single value or as a
range of numbers n-m.
The following Number Plan and Number Type values are supported:
• 0,0 = Unknown, Unknown
• 9,0 = Private, Unknown
• 9,1 = Private, Level 2 Regional
• 9,2 = Private, Level 1 Regional
• 9,3 = Private, PISN Specific
• 9,4 = Private, Level 0 Regional (local)
• 1,0 = Public(ISDN/E.164), Unknown
• 1,1 = Public(ISDN/E.164), International
• 1,2 = Public(ISDN/E.164), National
• 1,3 = Public(ISDN/E.164), Network Specific
• 1,4 = Public(ISDN/E.164), Subscriber
• 1,6 = Public(ISDN/E.164), Abbreviated