User`s manual

MP-1xx H.323 User’s Manual 5. Configuring the MP-1xx
Version 4.4 69 March 2005
Table 5-9: Number Manipulation ini File Parameters (continues on pages 69 to 70)
Parameter Name in ini File Parameter Format
NumberMapTel2IP
Manipulates the destination number for Tel to IP calls.
NumberMapTel2IP = a,b,c,d,e,f,g
a = Destination number prefix
b = Number of stripped digits from the left, or (if brackets are used)
from the right. A combination of both options is allowed.
c = String to add as prefix, or (if brackets are used) as suffix. A
combination of both options is allowed.
d = Number of remaining digits from the right
e = H.225/Q.931 Number Plan
f = H.225/Q.931 Number Type
g = Source number prefix
The ‘b’ to ‘f’ manipulations rules are applied if the called and calling
numbers match the
‘a’ and ‘g’ conditions.
The manipulation rules are executed in the following order: ‘b’, ‘d’ and ‘c’.
Parameters can be skipped by using the sign "$$", for example:
NumberMapTel2IP=01,2,972,$$,0,0,$$
NumberMapTel2IP=03,(2),667,$$,0,0,22
NumberMapIP2Tel
Manipulate the destination number for IP to Tel calls.
NumberMapIP2Tel = a,b,c,d,e,f,g,h,i
a = Destination number prefix.
b = Number of stripped digits from the left, or (if brackets are used)
from the right. A combination of both options is allowed.
c = String to add as prefix, or (if brackets are used) as suffix. A
combination of both options is allowed.
d = Number of remaining digits from the right.
e = Not applicable, set to $$.
f = Not applicable, set to $$.
g = Source number prefix.
h = Not applicable, set to $$.
i = Source IP address (obtained from the Setup message).
The ‘b’ to ‘d’ manipulation rules are applied if the called and calling
numbers match the
‘a’, ‘g’ and ‘i’ conditions.
The manipulation rules are executed in the following order: ‘b’, ‘d’ and ‘c’.
Parameters can be skipped by using the sign "$$", for example:
NumberMapIP2Tel =01,2,972,$$,$$,$$,034,$$,10.13.77.8
NumberMapIP2Tel =03,(2),667,$$,$$,$$,22
Note: The Source IP address can include the “x” wildcard to represent
single
digits. For example: 10.8.8.xx represents all the addresses between
10.8.8.10 to 10.8.8.99.