User`s manual

MP-1xx H.323
MP-1xx H.323 User’s Manual 62 Document #: LTRT-65104
5.8.2.2 Supplementary Services
Use this screen to configure parameters that are associated with supplementary services. For
detailed information on the supplementary services, refer to Section
8.5 on page 155.
 To configure the supplementary services’ parameters, take these 4
steps:
1. Open the ‘Supplementary Services’ screen (Protocol Management menu > Advanced
Parameters submenu > Supplementary Services option); the ‘Supplementary Services’
screen is displayed.
Figure
5-8: Supplementary Services Parameters Screen
2. Configure the supplementary services parameters according to Table
5-6.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail refer to Section
5.12 on page
140.