User`s manual

MP-1xx H.323 User’s Manual 5. Configuring the MP-1xx
Version 4.4 61 March 2005
Table 5-5: Advanced Parameters, General Parameters (continues on pages 58 to 61)
Parameter Description
EnableLanWatchDog
[Enable LAN Watchdog]
Disable [0] = Disable LAN Watch-Dog (default).
Enable [1] = Enable LAN Watch-Dog.
If LAN Watch-Dog is enabled, the gateway restarts when a network failure is detected.
CutThrough
[Enable Calls Cut Through]
Enables users to receive incoming IP calls while the port is in an offhooked state.
Disable [0] = Disabled (default).
Enable [1] = Enabled.
If enabled, FXS gateways answer the call and “cut through” the voice channel, if there is
no other active call on that port, even if the port is in offhooked state.
When the call is terminated (by the remote party), the gateway plays a reorder tone for
‘TimeForReorderTone’ seconds and is then ready to answer the next incoming call,
without onhooking the phone.
The waiting call is automatically answered by the gateway when the current call is
terminated (EnableCallWaiting=1).
Note: This option is applicable only to FXS gateways.