User`s manual

MP-1xx H.323 User’s Manual 5. Configuring the MP-1xx
Version 4.4 57 March 2005
5.8.2 Configuring the Advanced Parameters
Use this submenu to configure the gateway’s advanced control protocol parameters.
5.8.2.1 General Parameters
Use this screen to configure general control protocol parameters.
 To configure the general parameters under Advanced Parameters, take
these 4 steps:
1. Open the ‘General Parameters’ screen (Protocol Management menu > Advanced
Parameters submenu > General Parameters option); the ‘General Parameters’ screen is
displayed.
Figure
5-7: Advanced Parameters, General Parameters Screen