User`s manual

MP-1xx H.323
MP-1xx H.323 User’s Manual 54 Document #: LTRT-65104
5.8.1.4 DTMF & Dialing Parameters
Use this screen to configure parameters that are associated with DTMF and dialing.
 To configure the dialing parameters, take these 4 steps:
1. Open the ‘DTMF & Dialing’ screen (Protocol Management menu > Protocol Definition
submenu > DTMF & Dialing option); the ‘DTMF & Dialing’ parameters screen is displayed.
Figure
5-6: DTMF & Dialing Parameters Screen
2. Configure the DTMF & Dialing parameters according to Table
5-4.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail refer to Section
5.12 on page
140.
Table
5-4: DTMF & Dialing Parameters (continues on pages 54 to 56)
Parameter Description
Rx DTMF Option
[RxDTMFOption]
Supported Receive DTMF negotiation method.
You can select one of the following options:
Not Supported [0] (default).
H.245 User Input [1].
H.245 Signal Method [2].
RFC 2833 [3].
All [4] = Accept all DTMF methods.
For information on DTMF transport types refer to Section 8.3 on page 153.