User`s manual

MP-1xx H.323
MP-1xx H.323 User’s Manual 48 Document #: LTRT-65104
5.8.1.2 Gatekeeper Parameters
Use this screen to configure parameters that are associated with Gatekeepers.
To configure the Gatekeeper parameters, take these 4 steps:
1. Open the ‘Gatekeeper’ parameters screen (Protocol Management menu > Protocol
Definition submenu > Gatekeeper option); the ‘Gatekeeper’ parameters screen is
displayed.
Figure
5-4: Gatekeeper Parameters Screen
2. Configure the Gatekeeper parameters according to Table
5-2.
3. Click the Submit button to save your changes or click the Re-Register button to save your
changes and to re-register to the Gatekeeper.
4. To save the changes so they are available after a power fail refer to Section
5.12 on page
140.