User`s manual

MP-1xx H.323
MP-1xx H.323 User’s Manual 104 Document #: LTRT-65104
5.9 Advanced Configuration
Use this subdivided menu to set the gateway’s advanced configuration parameters (for advanced
users only).
5.9.1 Configuring the Network Settings
From the Network Settings page you can define:
• IP settings.
• NTP settings.
• Syslog settings.
• SNMP settings.
• RTP settings.
• Ethernet Ports Information (read-only).
 To configure the Network Settings parameters, take these 4 steps:
1. Open the ‘Network Settings’ screen (Advanced Configuration menu > Network Settings);
the ‘Network Settings’ screen is displayed.
Figure
5-28: Network Settings Screen