User`s manual

SIP User's Manual 5. Web Management
Version 5.0 89 December 2006
5.5.2.4 Keypad Features
The Keypad Features screen (applicable only to FXS gateways) enables you to activate /
deactivate the following features directly from the connected telephone’s keypad:
 Hotline (refer to Section 5.5.9.2 on page 120).
 Caller ID Restriction (refer to Section 5.5.9.3 on page 121).
 Call Forward (refer to Section 5.5.9.4 on page 122).
¾
To configure the keypad features, take these 4 steps:
1. Open the ‘Keypad Features’ screen (Protocol Management menu > Advanced
Parameters submenu > Keypad Features option); the ‘Keypad Features’ screen is
displayed.
Figure 5-13: Keypad Features Screen
2. Configure the Keypad Features according to Table 5-12.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.10.2 on
page 205.
Notes:
• The method used by the gateway to collect dialed numbers is
identical to the method used during a regular call (i.e., max digits,
interdigit timeout, digit map, etc.).
• The activation of each feature remains in effect until it is deactivated
(i.e., it is not per call).