User`s manual

SIP User's Manual 5. Web Management
Version 5.0 67 December 2006
Table 5-4: Proxy & Registration Parameters (continues on pages 66 to 71)
Parameter Description
First Redundant Proxy IP
Address
[ProxyIP]
IP addresses of the first redundant Proxy you are using.
Enter the IP address as FQDN or in dotted format notation (for example
192.10.1.255). You can also specify the selected port in the format: <IP
Address>:<port>.
Note 1: This parameter is available only if you select ‘Use Proxy' in the ‘Enable
Proxy’ field.
Note 2: When port number is specified, DNS NAPTR/SRV queries aren’t performed,
even if ‘ProxyDNSQueryType’ is set to 1.
ini file note: The IP address of the first redundant Proxy is defined by the second
repetition of the ini file parameter ‘ProxyIP’.
Second Redundant Proxy
IP Address
[ProxyIP]
IP addresses of the second redundant Proxy you are using.
Enter the IP address as FQDN or in dotted format notation (for example
192.10.1.255). You can also specify the selected port in the format: <IP
Address>:<port>.
Note 1: This parameter is available only if you select ‘Use Proxy' in the ‘Enable
Proxy’ field.
Note 2: When port number is specified, DNS NAPTR/SRV queries aren’t performed,
even if ‘ProxyDNSQueryType’ is set to 1.
ini file note: The IP address of the second redundant Proxy is defined by the third
repetition of the ini file parameter ‘ProxyIP’.
Third Redundant Proxy IP
Address
[ProxyIP]
IP addresses of the third redundant Proxy you are using.
Enter the IP address as FQDN or in dotted format notation (for example
192.10.1.255). You can also specify the selected port in the format: <IP
Address>:<port>.
Note 1: This parameter is available only if you select ‘Use Proxy' in the ‘Enable
Proxy’ field.
Note 2: When port number is specified, DNS NAPTR/SRV queries aren’t performed,
even if ‘ProxyDNSQueryType' is set to 1.
ini file note: The IP addresses of the third redundant Proxy is defined by the fourth
repetition of the ini file parameter ‘ProxyIP’.