User`s manual

MediaPack
SIP User's Manual 62 Document #: LTRT-65408
Table 5-3: Protocol Definition, General Parameters (continues on pages 58 to 64)
Parameter Description
Use Display Name as
Source Number
[UseDisplayNameAsSourc
eNumber]
Applicable to IPÆTel calls.
No [0] = The IP Source Number is used as the Tel Source Number and the IP
Display Name is used as the Tel Display Name (if IP Display Name is received). If
no Display Name is received from IP, the Tel Display Name remains empty
(default).
Yes [1] = If an IP Display Name is received, it is used as the Tel Source Number
and also as the Tel Display Name, the Presentation is set to Allowed (0). If no
Display Name is received from IP, the IP Source Number is used as the Tel
Source Number and the Presentation is set to Restricted (1).
For example:
When the following is received ’from: 100 <sip:200@201.202.203.204>’, the
outgoing Source Number and Display Name are set to ’100’ and the Presentation
is set to Allowed (0).
When the following is received ‘from: <sip:100@101.102.103.104>’, the outgoing
Source Number is set to ‘100’ and the Presentation is set to Restricted (1).
Play Ringback Tone to IP
[PlayRBTone2IP]
Don’t Play
[0] = Ringback tone isn’t played to the IP side of the call (default).
Play
[1] = Ringback tone is played to the IP side of the call after SIP 183
session progress response is sent (applies only to FXS gateways, in FXO
gateways the Ringback tone isn’t played).
Note 1: To enable the gateway to send a 183 response, set ‘EnableEarlyMedia’ to
1.
Note 2: If ‘EnableDigitDelivery = 1’, the gateway doesn’t play a Ringback tone to
IP and doesn’t send a 183 response.
Play Ringback Tone to Tel
[PlayRBTone2Tel]
Don’t Play
[0] = Ringback Tone isn’t played.
Always Play
[1] = Ringback Tone is played to the Tel side of the call when
180/183 response is received.
Play According to 180/183
[2] = Ringback Tone is played to the Tel side of the call
if no SDP is received in 180/183 responses. If 180/183 with SDP message is
received, the gateway cuts through the voice channel and doesn’t play Ringback
tone (default).
Play According to PI [3] = N/A.