User`s manual

MediaPack
SIP User's Manual 54 Document #: LTRT-65408
5.4.3 Entering Phone Numbers in Various Tables
Phone numbers entered into various tables on the gateway, such as the Tel to IP routing
table, must be entered without any formatting characters. For example, if you wish to enter
the phone number 555-1212, it must be entered as 5551212 without the hyphen (-). If the
hyphen is entered, the entry does not work. The hyphen character is used in number entry
only, as part of a range definition. For example, the entry [20-29] means ‘all numbers in the
range 20 to 29’.
5.4.4 Searching for Configuration Parameters
The Embedded Web Server provides a search engine that allows you to search any ini file
parameter that is configurable by the Web server. The Search button, located near the
bottom of the Main menu bar (refer to Figure 5-2 on page 52) is used to perform parameter
searches.
You can search for a specific parameter (e.g., "EnableIPSec") or a sub-string of that
parameter (e.g., "sec"). If you search for a sub-string, the Embedded Web Server lists all
parameters that contain the searched sub-string in their parameter names.
¾
To search for an ini file parameter configurable by the Web server,
take these 3 steps:
1. In the 'Search Engine' field, enter the ini parameter name or sub-string of the
parameter name.
2. Click Search. The 'Searched Result' screen appears, listing all searched parameter
results.
Figure 5-3: Searched Result Screen
Each searched result displays the following:
• Parameter name (hyperlinked to its location in the Embedded Web Server)
• Brief description of the parameter
• Hyperlink in green displaying the URL path to its location in the Embedded Web
Server location