User`s manual

MediaPack
SIP User's Manual 366 Document #: LTRT-65408
E.1.3 Creating a Loadable Prerecorded Tones File
For detailed information on the PRT file, refer to Section 15.2 on page 330.
Note: The maximum size of a PRT file that can be loaded to the gateway is
100 KB.
¾ To create a loadable PRT dat file from your raw data files, take
these 7 steps:
1. Prepare the prerecorded tones (raw data PCM or L8) files you want to combine into a
single dat file using standard recording utilities.
2. Execute the TrunkPack Downloadable Conversion utility, DConvert.exe (supplied with
the software package); the utility’s main screen opens (shown in Figure E-1).
3. Click the Process Prerecorded Tones File(s) button; the Prerecorded Tones File(s)
screen, shown in Figure E-4, opens.
Figure E-4: Prerecorded Tones Screen