User`s manual

MediaPack
SIP User's Manual 32 Document #: LTRT-65408
3.1.4.3 Installing the MP-11x in a 19-inch Rack
The MP-11x can be installed in a standard 19-inch rack by placing it on an AudioCodes'
19-inch rack-mounting shelf that is pre-installed in the rack. The shelf can hold up to two
MP-11x gateways. This shelf can be ordered separately from AudioCodes.
Note: The 19-inch rack shelf is not supplied in the standard package kit, but
can be ordered separately (Bulk Pack package MCMK00015 with 10
rack mounting shelves for MP-11x). For ordering and pricing, please
contact your AudioCodes' distributor.
Figure 3-3: MP-11x Rack Mount
Table 3-2: MP-11x Rack Mount
Item # Functionality
1 Standard rack holes used to attach the shelf to the rack
2 Eight shelf-to-device screws
¾ To install the MP-11x in a 19-inch rack, take these 3 steps:
1. Use the shelf-to-device screws (supplied) to attach one or two MP-11x devices to the
shelf.
2. Position the shelf in the rack and line up its side holes with the rack frame holes.
3. Use four standard rack screws (not supplied) to attach the shelf to the rack.