User`s manual

SIP User's Manual 14. SNMP-Based Management
Version 5.0 311 December 2006
Note 1: The following are special notes pertaining to MIBs:
• A detailed explanation of each parameter can be viewed in an
SNMP browser in the ‘MIB Description’ field.
• Not all groups in the MIB are functional. Refer to version release
notes.
• Certain parameters are non-functional. Their MIB status is marked
'obsolete'.
• When a parameter is set to a new value via SNMP, the change may
affect device functionality immediately or may require that the
device be soft reset for the change to take effect. This depends on
the parameter type.
Note 2: The current (updated) device configuration parameters are
programmed into the device provided that the user does not load an ini
file to the device after reset. Loading an ini file after reset overrides the
updated parameters.
Additional MIBs are to be supported in future releases.