User`s manual

MediaPack
SIP User's Manual 286 Document #: LTRT-65408
In the SPD example, all packets designated to IP address 10.11.2.21 that originates from
the OAM interface (regardless to their destination and source ports) and whose protocol is
UDP are encrypted, the SPD also defines an SA lifetime of 900 seconds and two security
proposals: DES/SHA1 and 3DES/SHA1.
¾
To configure the SPD table using the Embedded Web Server, take
these 6 steps:
1. Access the Embedded Web Server (refer to Section 5.3 on page 51).
2. Open the ‘IPSec Table’ screen (Advanced Configuration menu > Security Settings
> IPSec Table option); the ‘IPSec Table’ screen is displayed.
Figure 12-5: IPSec Table Screen
3. In the ‘Policy Index’ drop-down list, select the rule you want to edit (up to 20 rules can
be configured).
4. Configure the SPD parameters according to Table 12-3 on page 284.
5. Click the button Create; a row is create in the SPD table
6. To save the changes so they are available after a power fail, refer to Section 5.10.2 on
page 205.
To delete a peer from the SPD table, select it in the ‘Policy Index’ drop-down list, click the
button Delete and click OK in the prompt.