User`s manual

MediaPack
SIP User's Manual 276 Document #: LTRT-65408
10.6.4 Modifying ini File Parameters via the Web AdminPage
¾ To modify ini file parameters via the AdminPage, take these 6
steps:
1. Access the MediaPack Embedded Web Server (refer to Section 5.3 on page 51).
2. In the URL field, append the suffix ‘AdminPage’ (note that it’s case-sensitive) to the IP
address, e.g., http://10.1.229.17/AdminPage.
3. Click the INI Parameters option, the INI Parameters screen is displayed (shown in
Figure 10-8).
Figure 10-8: INI Parameters Screen
4. From the 'Parameter Name' drop-down list, select the required ini file parameter.
5. In the 'Enter Value' field, enter the parameter’s new value.
6. Click the Apply New Value button; the INI Parameters screen is refreshed, the
parameter name with the new value appears in the fields at the top of the screen and
the 'Output Window' pane displays a log displaying information on the operation.
Note: You cannot load the image files (e.g., logo/background image files) to
the device by choosing a file name parameter in this screen.