User`s manual

SIP User's Manual 10. Advanced System Capabilities
Version 5.0 275 December 2006
10.6.3 Customizing the Product Name
The Product Name text string can be modified according to OEMs specific requirements.
 To replace AudioCodes’ default product name with a text string via the Web Interface,
modify the two ini file parameters in Table 10-6 according to the procedure described
in Section 10.6.4 on page 276.
 To replace AudioCodes’ default product name with a text string via the ini file,
add/modify the two ini file parameters in Table 10-6 according to the procedure
described in Section 6.2 on page 209.
Table 10-6: Web Appearance Customizable ini File Parameters
Parameter Description
UseProductName 0 = Don’t change the product name (default).
1 = Enable product name change.
UserProductName
Text string that replaces the product name.
The default is ‘MediaPack’.
The string can be up to 29 characters.