User`s manual

MediaPack
SIP User's Manual 272 Document #: LTRT-65408
10.6.1.1 Replacing the Main Corporate Logo with an Image File
Note: Use a gif, jpg or jpeg file for the logo image. It is important that the
image file has a fixed height of 59 pixels (the width can be configured
up to a maximum of 339 pixels). The size of the image files (logo and
background) is limited each to 64 kbytes.
¾ To replace the default logo with your own corporate image via the
Web Interface, take these 7 steps:
1. Access the MediaPack Embedded Web Server (refer to Section 5.3 on page 51).
2. In the URL field, append the suffix ‘AdminPage’ (note that it’s case-sensitive) to the IP
address, e.g., http://10.1.229.17/AdminPage.
3. Click Image Load to Device; the Image Download screen is displayed (shown in
Figure 10-7).
Figure 10-7: Image Download Screen
4. Click the Browse button in the 'Send Logo Image File from your computer to the
device' box. Navigate to the folder that contains the logo image file you want to load.
5. Click the Send File button; the file is sent to the device. When loading is complete, the
screen is automatically refreshed and the new logo image is displayed.
6. Note the appearance of the logo. If you want to modify the width of the logo (the
default width is 339 pixels), in the 'Logo Width' field, enter the new width (in pixels)
and click the Set Logo Width button.
7. To save the image to flash memory so it is available after a power fail, refer to Section
5.10.2 on page 205.
The new logo appears on all Web Interface screens.
Tip: If you encounter any problem during the loading of the files, or you
want to restore the default images, click the Restore Default Images
button.