User`s manual

MediaPack
SIP User's Manual 206 Document #: LTRT-65408
5.10.3 Resetting the MediaPack
The 'Maintenance Actions' screen enables you to remotely reset the gateway. Before you
reset the gateway, you can choose the following options:
 Save the gateway's current configuration to the flash memory (non-volatile).
 Perform a graceful shutdown. Reset starts only after a user-defined time expires or no
more active traffic exists (the earliest thereof).
¾
To reset the gateway, take these 5 steps:
1. Open the ‘Maintenance Actions' screen (Maintenance menu); the ‘Maintenance
Actions' screen is displayed.
Figure 5-73: Maintenance Actions Screen
2. Under the RESET group, from the 'Burn To FLASH' drop-down list, select one of the
following options:
• 'Yes': The gateway's current configuration is burned (i.e., saved) to the flash
memory prior to reset (default).
• 'No': Resets the device without burning (i.e., saving) the current configuration to
flash (discards all unsaved modifications to the configuration).
3. Under the RESET group, from the 'Graceful Option' drop-down list, select one of the
following options:
• 'Yes': Reset starts only after the user-defined time in the 'Shutdown Timeout' field
(refer to Step 4) expires or no more active traffic exists (the earliest thereof). In
addition, no new traffic is accepted.
• 'No': Reset starts regardless of traffic and any existing traffic is terminated at
once.