User`s manual

SIP User's Manual 5. Web Management
Version 5.0 203 December 2006
Figure 5-70: Auxiliary Files Screen
5.9.2.1 Loading the Auxiliary Files via the ini File
¾ To load the auxiliary files via the ini file, take these 3 steps:
1. In the ini file, define the auxiliary files to be loaded to the MediaPack. You can also
define in the ini file whether the loaded files should be stored in the non-volatile
memory so that the TFTP process is not required every time the MediaPack boots up.
2. Locate the auxiliary files you want to load and the ini file in the same directory.
3. Invoke a BootP/TFTP session; the ini and auxiliary files are loaded onto the
MediaPack.
Table 5-64 below describes the ini file parameters that are associated with the
configuration files.
Table 5-64: Configuration Files ini File Parameters
ini File Parameter Name Description
CallProgressTonesFileName
The name (and path) of the file containing the Call Progress Tones
definition.
FXSLoopCharacteristicsFileName
The name (and path) of the file providing the FXS line characteristic
parameters.
PrerecordedTonesFileName
The name (and path) of the file containing the Prerecorded Tones.
UserInfoFileName
The name (and path) of the file containing the User Information data.
SaveConfiguration
Determines if the gateway’s configuration (parameters and files) is saved
to flash (non-volatile memory).
0 = Configuration isn’t saved to flash memory.
1 = Configuration is saved to flash memory (default).