User`s manual

SIP User's Manual 5. Web Management
Version 5.0 201 December 2006
9. Follow the same procedure you followed when loading the ini file (refer to Step 7). The
same procedure applies to the ‘Load a coefficient file’ screen.
10. In the ‘Finish’ screen (refer to Figure 5-68), the Next button is disabled. Complete the
upgrade process by clicking Reset or Cancel.
• Click Reset, the MediaPack ‘burns’ the newly loaded files to flash memory. The
‘Burning files to flash memory’ screen appears. Wait for the ‘burn’ to finish. When
it finishes, the ‘End Process’ screen appears displaying the burned configuration
files (refer to Figure 5-69).
• Click Cancel, the MediaPack resets, utilizing the files previously stored in flash
memory. (Note that these are NOT the files you loaded in the previous Wizard
steps).
Figure 5-68: Finish Screen
Figure 5-69: ‘End Process’ Screen
11. Click the End Process button; the ‘Quick Setup’ screen appears and the full Web
application is reactivated.