User`s manual

MediaPack
SIP User's Manual 200 Document #: LTRT-65408
Figure 5-66: Load an ini File Screen
7. In the ‘Load an ini File’ screen, you can now choose to either:
• Click Browse and navigate to the ini file; the check box ‘Use existing
configuration’, by default checked, becomes unchecked. Click Send File; the ini
file is loaded to the MediaPack and you’re notified as to a successful loading.
• Ignore the Browse button (its field remains undefined and the check box ‘Use
existing configuration’ remains checked by default).
• Ignore the Browse button and uncheck the ‘Use existing configuration’ check
box; no ini file is loaded, the MediaPack uses its factory-preconfigured values.
8. You can now choose to either:
• Click Cancel; the MediaPack resets utilizing the cmp, ini and all other
configuration files that were previously stored in flash memory. Note that these
are NOT the files you loaded in the previous Wizard steps.
• Click Reset; the MediaPack resets, utilizing the new cmp and ini file you loaded
up to now as well as utilizing the other configuration files.
• Click Back; the ‘Load a cmp file’ screen is reverted to; refer to Figure 5-64.
• Click Next; the ‘Load a CPT File’ screen opens, refer to Figure 5-67; Loading a
new CPT file or any other auxiliary file listed in the Wizard is optional.
Figure 5-67: Load a CPT File Screen