User`s manual

MediaPack
SIP User's Manual 194 Document #: LTRT-65408
5.7.4 Viewing the Ethernet Port Information
The Ethernet Port Information screen provides read-only information on the Ethernet
connection used by the MediaPack. The Ethernet Port Information parameters are
displayed in Table 5-61. For detailed information on the Ethernet interface configuration,
refer to Section 9.1 on page 247.
¾
To view the Ethernet Port Information parameters, take this step:
 Open the ‘Ethernet Port Information’ screen (Advanced Configuration menu >
Network Settings > Ethernet Port Information option); the ‘Ethernet Port
Information’ screen is displayed.
Figure 5-60: Ethernet Port Information Screen
Table 5-61: Ethernet Port Information Parameters
Parameter Description
Port 1 Duplex Mode Shows the Duplex mode the Ethernet port is using (Half Duplex or Full
Duplex).
Port 1 Speed Shows the speed, in Mbps, that the Ethernet port is using (10 Mbps or 100
Mbps).