User`s manual

MediaPack
SIP User's Manual 188 Document #: LTRT-65408
¾ To view the IP connectivity information, take these 2 steps:
1. Set ‘AltRoutingTel2IPEnable’ to 1 or 2.
2. Open the ‘IP Connectivity’ screen (Status & Diagnostics menu > Gateway Statistics
submenu > IP Connectivity); the ‘IP Connectivity’ screen is displayed (Figure 5-55).
Figure 5-55: IP Connectivity Screen
Table 5-58: IP Connectivity Parameters
Column Name Description
IP Address
IP address defined in the destination IP address field in the Tel to IP Routing table.
or
IP address that is resolved from the host name defined in the destination IP address
field in the Tel to IP Routing table.
Host Name
Host name (or IP address) defined in the destination IP address field in the Tel to IP
Routing table.
Connectivity Method
The method according to which the destination IP address is queried periodically
(currently only by ping).
Connectivity Status
Displays the status of the IP address’ connectivity according to the method in the
‘Connectivity Method’ field.
Can be one of the following:
 OK = Remote side responds to periodic connectivity queries.
 Lost = Remote side didn’t respond for a short period.
 Fail = Remote side doesn’t respond.
 Init = Connectivity queries not started (e.g., IP address not resolved).
 Disable = Connectivity option is disabled (‘AltRoutingTel2IPMode’ equals 0 or 2).
Quality Status
Determines the QoS (according to packet loss and delay) of the IP address.
Can be one of the following:
 Unknown = Recent quality information isn’t available.
 OK
 Poor
Note 1: This field is applicable only if the parameter ‘AltRoutingTel2IPMode’ is set to 2
or 3.
Note 2: This field is reset if no QoS information is received for 2 minutes.
Quality Info.
Displays QoS information: delay and packet loss, calculated according to previous calls.
Note 1: This field is applicable only if the parameter ‘AltRoutingTel2IPMode’ is set to 2
or 3.
Note 2: This field is reset if no QoS information is received for 2 minutes.
DNS Status
Can be one of the following:
 DNS Disable
 DNS Resolved
 DNS Unresolved