User`s manual

SIP User's Manual 5. Web Management
Version 5.0 187 December 2006
5.7 Status & Diagnostics
Use this menu to view and monitor the gateway’s channels, Syslog messages, hardware /
software product information, and to assess the gateway’s statistics and IP connectivity
information.
5.7.1 Gateway Statistics
Use the screens under Gateway Statistics to monitor real-time activity such as IP
Connectivity information, call details and call statistics, including the number of call
attempts, failed calls, fax calls, etc.
Notes: The 'Gateway Statistics' screens doesn’t refresh automatically.
To view updated information, re-access the screen you require.
5.7.1.1 IP Connectivity
The IP Connectivity screen provides you with an online read-only network diagnostic
connectivity information on all destination IP addresses configured in the Tel to IP Routing
table.
Notes:
This information is available only if the parameter
‘AltRoutingTel2IPEnable’ (described in Table 5-16) is set to 1
(Enable) or 2 (Status Only).
The information in columns ‘Quality Status’ and ‘Quality Info.’ (per IP
address) is reset if two minutes elapse without a call to that
destination.