User`s manual

MediaPack
SIP User's Manual 186 Document #: LTRT-65408
5.6.6.6 SNMP ini File Parameters
Table 5-57 describes the SNMP parameters that can only be configured via the ini file.
Table 5-57: SNMP ini File Parameters
ini File Parameter Name Description
SNMPPort
The device’s local UDP port used for SNMP Get/Set commands.
The range is 100 to 3999.
The default port is 161.
SNMPTrustedMGR_x
Up to five IP addresses of remote trusted SNMP managers from which
the SNMP agent accepts and processes get and set requests.
Note 1: If no values are assigned to these parameters any manager can
access the device.
Note 2: Trusted managers can work with all community strings.
SNMPManagerTrapUser_x
This parameter can be set to the name of any configured SNMPV3 user
to associate with this trap destination. This determines the trap format,
authentication level, and encryption level. By default, the trap is
associated with the SNMP trap community string.
AlarmHistoryTableMaxSize
Determines the maximum number of rows in the Alarm History table.
The parameter can be controlled by the Config Global Entry Limit MIB
(located in the Notification Log MIB).
The valid range is 50 to 100. The default value is 100.