User`s manual

MediaPack
SIP User's Manual 178 Document #: LTRT-65408
Table 5-51: Management Settings Parameters (continues on pages 177 to 178)
Parameter Description
Access to Restricted Domains
[ActivityListToLog = ARD]
Access to Restricted Domains.
The following screens are restricted:
(1) ini parameters (AdminPage)
(2) General Security Settings
(3) Configuration File
(4) IPSec/IKE tables
(5) Software Upgrade Key
(6) Internal Firewall
(7) Web Access List.
(8) Web User Accounts
Non Authorized Access
[ActivityListToLog = NAA]
Attempt to access the Embedded Web Server with a false / empty username
or password.
Sensitive Parameters Value
Change
[ActivityListToLog = SPC]
Changes made to sensitive parameters:
(1) IP Address
(2) Subnet Mask
(3) Default Gateway IP Address
(4) ActivityListToLog
ini file example:
ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard', 'naa', 'spc'
5.6.6.1 Configuring the SNMP Managers Table
The SNMP Managers table allows you to configure the attributes of up to five SNMP
managers.
¾
To configure the SNMP Managers Table, take these 5 steps:
1. Access the ‘Management Settings’ screen (Advanced Configuration menu >
Management Settings); the ‘Management Settings’ screen is displayed (Figure 5-51).
2. Open the SNMP Managers Table screen by clicking the arrow sign (-->) to the right of
the SNMP Managers Table label; the SNMP Managers Table screen is displayed
(Figure 5-52).
3. Configure the SNMP Managers parameters according to Table 5-52.
4. Click the Submit button to save your changes.
5. To save the changes so they are available after a power fail, refer to Section 5.10.2 on
page 205.
Figure 5-52: SNMP Managers Table Screen