User`s manual

MediaPack
SIP User's Manual 176 Document #: LTRT-65408
5.6.5.7 Configuring the IKE Table
Use the IKE Table screen to configure the IKE parameters. For detailed information on
IPSec and IKE, refer to Section 12.1 on page 279.
5.6.6 Configuring the Management Settings
¾ To configure the Management Settings parameters, take these 4
steps:
1. Open the ‘Management Settings’ screen (Advanced Configuration menu >
Management Settings); the ‘Management Settings’ screen is displayed.
Figure 5-51: Management Settings Screen
2. Configure the Management Settings according to Table 5-51.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.10.2 on
page 205.