User`s manual

SIP User's Manual 5. Web Management
Version 5.0 173 December 2006
5.6.5.5 Configuring the General Security Settings
¾ To configure the General Security Settings parameters, take these
4 steps:
1. Open the ‘General Security Settings’ screen (Advanced Configuration menu >
Security Settings > General Security Settings option); the ‘General Security
Settings’ screen is displayed.
Figure 5-50: General Security Settings Screen
2. Configure the General Security Settings according to Table 5-50 below.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.10.2 on
page 205.