User`s manual

MediaPack
SIP User's Manual 168 Document #: LTRT-65408
5.6.5 Security Settings
From the Security Settings you can:
 Configure the Web User Accounts (refer to Section 5.6.5.1 below).
 Configure the Web & Telnet Access List (refer to Section 5.6.5.2 on page 170).
 Configure the Firewall Settings (refer to Section 5.6.5.3 on page 171).
 Configure the Certificates (refer to Section 5.6.5.4 on page 172).
 Configure the General Security Settings (refer to Section 5.6.5.5 on page 173).
 Configure the IPSec Table (refer to Section 5.6.5.6 on page 175).
 Configure the IKE Table (refer to Section 5.6.5.7 on page 176).
5.6.5.1 Configuring the Web User Accounts
To prevent unauthorized access to the Embedded Web Server, two user accounts are
available, a primary and secondary. Each account is composed of three attributes:
username, password and access level. For detailed information on the user account
mechanism, refer to Section 5.2.1 on page 49.
It is recommended that you change the default username and password of the account you
use to access the Embedded Web Server.