User`s manual

MediaPack
SIP User's Manual 166 Document #: LTRT-65408
5.6.4 Regional Settings
The ‘Regional Settings’ screen enables you to set and view the gateway’s internal date and
time and to load to the gateway the following configuration files: Call Progress Tones,
coefficient and Voice Prompts (currently not applicable to MediaPack gateways). For
detailed information on the configuration files, refer to Chapter 6 on page 209.
¾
To configure the date and time of the MediaPack, take these 3
steps:
1. Open the ‘Regional Settings’ screen (Advanced Configuration menu > Regional
Settings); the ‘Regional Settings' screen is displayed.
Figure 5-46: Regional Settings Screen
2. Enter the time and date where the gateway is installed.
3. Click the Set Date & Time button; the date and time are automatically updated.
Note: After performing a hardware reset, the date and time are returned to
their defaults and should be updated.