User`s manual

SIP User's Manual 5. Web Management
Version 5.0 157 December 2006
5.6.2.3 Configuring the RTP / RTCP Settings
¾ To configure the RTP / RTCP Settings parameters, take these 4
steps:
1. Open the ‘RTP / RTCP Settings’ screen (Advanced Configuration menu > Media
Settings > RTP / RTCP Settings option); the ‘RTP / RTCP Settings’ screen is
displayed.
Figure 5-42: RTP / RTCP Settings Screen
2. Configure the RTP / RTCP Settings according to Table 5-44.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.10.2 on
page 205.