User`s manual

MediaPack
SIP User's Manual 152 Document #: LTRT-65408
5.6.2 Configuring the Media Settings
From the Media Settings page you can define:
 Voice Settings (refer to Section 5.6.2.1 below).
 Fax / Modem / CID Settings (refer to Section 5.6.2.2 on page 154).
 RTP/RTCP Settings (refer to Section 5.6.2.3 on page 157).
 Hook-Flash Settings (refer to Section 5.6.2.4 on page 160).
 General Media Settings (refer to Section 5.6.2.5 on page 161).
These parameters are applied to all MediaPack channels.
Notes:
• Several Channels Settings parameters can be configured per call
using profiles (refer to Section 5.5.6 on page 108
• Those parameters contained within square brackets are the names
used to configure the parameters via the ini file.
• Channel parameters are changeable on-the-fly. Changes take effect
from next call.
5.6.2.1 Configuring the Voice Settings
¾ To configure the Voice Settings parameters, take these 4 steps:
1. Open the ‘Voice Settings’ screen (Advanced Configuration menu > Media Settings
> Voice Settings option); the ‘Voice Settings’ screen is displayed.
Figure 5-40: Voice Settings Screen