User`s manual

MediaPack
SIP User's Manual 138 Document #: LTRT-65408
5.6.1.1 Configuring the IP Settings
¾ To configure the IP Settings parameters, take these 4 steps:
1. Open the ‘IP Settings’ screen (Advanced Configuration menu > Network Settings >
IP Settings option); the ‘IP Settings’ screen is displayed.
Figure 5-35: IP Settings Screen
2. Configure the IP Settings according to Table 5-36.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.10.2 on
page 205.
Table 5-36: Network Settings, IP Settings Parameters
(continues on pages 138 to 140)
Parameter Description
IP Networking Mode
[EnableMultipleIPs]
Enables / disables the Multiple IPs mechanism.
Single IP Network [0] (default).
Multiple IP Network
[1].
For detailed information on Multiple IPs, refer to Section
9.8 on page 253.
IP Address IP address of the gateway.
Enter the IP address in dotted format notation, for example 10.8.201.1.
Note 1: A warning message is displayed (after pressing the button ‘Submit’) if
the entered value is incorrect.
Note 2: After changing the IP address and pressing the button ‘Submit’, a
prompt appears indicating that for the change to take effect, the gateway is to
be reset.