User`s manual

SIP User's Manual 5. Web Management
Version 5.0 133 December 2006
Table 5-35: Protocol Management, ini File Parameters (continues on pages 132 to 137)
ini File Parameter
Name
Valid Range and Description
DisableAutoDTMFMute
Enables / disables the automatic mute of DTMF digits when out-of-band DTMF
transmission is used.
0 = Auto mute is used (default).
1 = No automatic mute of in-band DTMF.
When ‘DisableAutoDTMFMute=1’, the DTMF transport type is set according to the
parameter ‘DTMFTransportType’ and the DTMF digits aren’t muted if out-of-band
DTMF mode is selected (’TxDTMFOption = 1, 2 or 3'). This enables the sending of
DTMF digits in-band (transparent of RFC 2833) in addition to out-of-band DTMF
messages.
Note: Usually this mode is not recommended.
FirstCallWaitingToneID
Determines the index of the first Call Waiting Tone in the CPT file. This feature
enables the called party to distinguish between four different call origins (e.g.,
external vs. internal calls).
The gateway plays the tone received in the ‘play tone CallWaitingTone#’
parameter of an INFO message + the value of this parameter - 1.
The valid range is -1 to 100. The default value is -1 (not used).
Note 1: It is assumed that all Call Waiting Tones are defined in sequence in the
CPT file.
Note 2: This feature is relevant only to Broadsoft’s application servers (the tone is
played using INFO message).
CountryCoefficients
Determines the FXO line characteristics (AC and DC) according to country of
origin.
Argentina = 0, Australia = 1, Austria = 2, Bahrain = 3, Belgium = 4, Brazil = 5,
Bulgaria = 6, Canada = 7, Chile = 8, China = 9, Colombia = 10, Croatia = 11,
Cyprus = 12, Czech_Republic = 13, Denmark = 14, Ecuador = 15, Egypt = 16,
El_Salvador = 17, Finland = 18, France = 19, Germany = 20, Greece = 21, Guam
= 22, Hong_Kong = 23, Hungary = 24, Iceland = 25, India = 26, Indonesia = 27,
Ireland = 28, Israel = 29, Italy = 30, Japan = 31, Jordan = 32, Kazakhstan = 33,
Kuwait = 34, Latvia = 35, Lebanon = 36, Luxembourg = 37, Macao = 38, Malaysia
= 39, Malta = 40, Mexico = 41, Morocco = 42, Netherlands = 43, New_Zealand =
44, Nigeria = 45, Norway = 46, Oman = 47, Pakistan = 48, Peru = 49, Philippines =
50, Poland = 51, Portugal = 52, Romania = 53, Russia = 54, Saudi_Arabia = 55,
Singapore = 56, Slovakia = 57, Slovenia = 58, South_Africa = 59, South_Korea =
60, Spain = 61, Sweden = 62, Switzerland = 63, Syria = 64, Taiwan = 65, TBR21 =
66, Thailand = 67, UAE = 68, United_Kingdom = 69, UnitedStates = 70, Yemen =
71
The default value is 70 (United States).
EnableCallerIDTypeTwo
Disables the generation of Caller ID type 2 when the phone is offhooked.
0 = Caller ID type 2 isn’t played.
1 = Caller ID type 2 is played (default).
MeteringType
Defines the metering tone (12 kHz or 16 kHz) that is detected by FXO gateways
and generated by FXS gateways.
0 = 12 kHz metering tone (default).
1 = 16 kHz metering tone.
Note: Suitable (12 kHz or 16 KHz) coeff must be used for both FXS and FXO
gateways.
PolarityReversalType
Defines the voltage change slope during polarity reversal or wink.
0 = Soft (default).
1 = Hard.
Note 1: Some Caller ID signals use reversal polarity and/or wink signals. In these
cases it is recommended to set PolarityReversalType to 1 (Hard).
Note 2: Applicable only to FXS gateways.