User`s manual

MediaPack
SIP User's Manual 110 Document #: LTRT-65408
Table 5-22: ini File Coder Group Parameter
Parameter Description
CoderName_ID
Defines groups of coders that can be associated with IP or Tel profiles (up to five
coders in each group).
Enter coder groups in the following format:
CoderName_<coder group ID from 1 to 4>=<Coder
Name>,<Ptime>,<Rate>,<Payload Type>,<Silence Suppression Mode>.
Note 1: This parameter (CoderName_ID) can appear up to 20 times (five coders in
four coder groups).
Note 2: The coder name is case-sensitive.
Note 3: If silence suppression is not defined (for a specific coder), the value
defined by the parameter EnableSilenceCompression is used.
Note 4: The value of several fields is hard-coded according to well-known
standards (e.g., the payload type of G.711 U-law is always 0). Other values can be
set dynamically. If no value is specified for a dynamic field, a default value is
assigned. If a value is specified for a hard-coded field, the value is ignored.
For example:
CoderName_1 = g711Alaw64k,20,,,0
CoderName_1 = g711Ulaw64k,40
CoderName_1 = g7231,90,1,,1
CoderName_2 = g726,$$,2,,0