User`s manual

MP-1xx/H.323 User’s Manual 7. Device Management
Version 4.2 Beta 87 June 2003
7.2.4.2 Set up Gateway Network Parameters
To change the Gateway network settings, select the “Network Settings” tab shown below.
Figure 7-3: Web Server – Network Settings
From network settings page the User can define:
" IP settings including the Gateway IP address and Subnet Mask.
" Logging settings, such as IP address of SysLog Server. If the SysLog Server is disabled, the
logging data is sent to the Gateway’s serial RS-232 port.
" SNMP settings.
" RTP settings, including RTP Base UDP port, RTP IP Differentiated Services or RTP IP TOS
and RTP IP Precedence QOS parameters.
" Ethernet status (read-only)
7.2.4.3 Channel Settings
From “Channel Settings” page the user can modify the following channel associated parameters:
" Voice Setting
" Fax/Modem/CID Settings
" RTP Settings
" IP Media Settings
7.2.4.4 Configuration File
Selecting the “Configuration Files” tab, enables the User to send new ini file to the Gateway or to
upload from Gateway to PC the current ini file the Gateway is using. The uploaded ini file will
include only parameters that were modified and contain other than default values.