User`s manual

MP-1xx/H.323 User’s Manual 7. Device Management
Version 4.2 Beta 85 June 2003
through PCI, the Embedded Web Server is always activated.
7.2.4 Using the Embedded Web Server
This section explains how to use the Embedded Web Server. After the initial IP address is set to
the Gateway, you can connect with the integral Web-based configuration application. To access
this Web application, use any standard Web-browsing application such as Microsoft™ Internet
Explorer (Ver. 5.0 and higher), Netscape™ Navigator (Ver. 7.0 and higher), etc., and specify the
IP address of the Gateway in the address field; the Embedded Web Server ‘Enter Network
Password’ screen appears, as shown in Figure 7-1. Enter the User Name and Password (default:
Admin, Admin). Click OK; the ‘Quick Setup’ screen is accessed. To configure the Gateway
parameters you can either use this menu or go directly to "Protocol Management" and “Advance
Configuration” menus. ‘Quick setup’ provides a basic set of Gateway configuration settings. An
example of the ‘Quick Setup’ configuration is described in Section 4.3 on page 30.
Figure 7-1: Embedded Web Server – Home Page