User`s manual

MP-1xx/H.323
MP-1xx/H.323 User’s Manual 70 Document #: LTRT-00651
6.2.2 The ini File Example
An example of an ini file for an H.323 Gateway is shown in Figure 6-2.
Figure 6-2: H.323 ini File Example
MGControlProtocolType = 4
[Channel Params]
DJBufferMinDelay = 75
RTPRedundancyDepth = 1
IsGatekeeperUsed = 1
GatekeeperIp = 192.168.122.179
DefaultNumber = 101
MaxDigits = 3
CoderName = g7231
IsFastConnectUsed = 1
; Phone of each end point
Channel2Phone = 0, 101
Channel2Phone = 1, 102
Channel2Phone = 2, 103
Channel2Phone = 3, 104
EnableSyslog = 0
LoggerFormat = 1
[Files]
CallProgressTonesFilename = 'CPUSA.dat'
BurnCallProgressTonesFile = 1
FXSCOEFFILENAME = 'coeff.dat'
BurnCoefFile = 1
Note 1: Using Windows Properties Display, verify that the MS-DOS name of the ini file is in fact
mp108.ini, and NOT by mistake mp108.ini.ini, or mp108~.ini.
Note 2: To restore MP-1xx default configuration parameters, use the mp1xx.ini file without any valid
parameters or with semicolon (;) character preceding all lines in the file.