User`s manual

MP-1xx/H.323 User’s Manual 6. Provisioning
Version 4.2 Beta 67 June 2003
Table 6-3: H.323 Parameters (continues on pages 59 to 67)
ini File Field Name
GUI Parameter Name
*
Valid Range and Description
AddTrunkGroupAs Prefix
0 – not used
1 - For Tel!IP incoming call, Hunt Group ID will be added as prefix to destination phone
number. Applicable only if Hunt group ID are configured.
Can be used to define various routing rules.
EnableCDR
0 – CDR is not used (default)
1- Call detail record will be send to Syslog server at each Call end.
MaxActiveCalls
The parameter can be used to limit number of calls on GW. When number of concurrent
calls reaches MaxActiveCalls, the GW reject calls from TEL and from IP.
* The parameter in the brackets refers to the Embedded Web Server. Some parameters don’t
appear in the Web.