User`s manual

MP-1xx/H.323
MP-1xx/H.323 User’s Manual 58 Document #: LTRT-00651
Table 6-2: Channel Parameters (continues on pages 56 to 58)
ini File Field Name
GUI Parameter Name
*
Valid Range and Description
MinimumFlashHookTime
25-300, (default = 250)
Minimum threshold in msec + 50msec for detection of HookFlash.
Relevant only for MP-1xx FXS Gateways.
DTMFDetectionPoint
0 = DTMF event is reported when button is pressed
1 = DTMF event is reported on button release (default)
The parameter is used for out of band dialing (H.245 user input message or H.225
keypad facility)
DTMFDigitLength
Time in msec for generating DTMF to PSTN side.
Default = 100 msec
DTMFInterDigitInterval
Time in msec between generated DTMFs to PSTN side
Default = 100 msec
CallerIDType
0 = Bellcore GR-30-CORE Type 1(default)
1 = ETSI Type 1
Both Bellcore and ETSI Type 1 Caller ID signals are generated/detected between
first and second rings.
TestMode
0 = CoderLoopback, encoder-decoder loopback inside DSP.
1 = PCMLoopback, loopback the incoming PCM to the outgoing PCM.
2 = ToneInjection, generates a 1000 Hz tone to outgoing PCM.
3 = NoLoopback, (default).
* The parameter in the brackets refers to the Embedded Web Server. Some parameters don’t
appear in the Web.