User`s manual

MP-1xx/H.323
MP-1xx/H.323 User’s Manual 44 Document #: LTRT-00651
Table 5-1: Using H.323 Gateway Features (continues on pages 41 to 44)
Feature Parameter Sheet of Excel
Utility
Value
To use the hunt groups it is required to define also
"IsUseFreeChannel=1" , and to define routing rules,
using "PSTNPrefix" parameter.
The routing IP!TEL rules define per each called
number prefix, the Hunt Group ID where the call will
be send to. For example:
PSTNPrefix = 101,1
Incoming IP!TEL call, with called number starting
with 101 will select free channel from 1
st
Hunt group.
Usually this feature will be used for FXO Gateways,
but there are some hunt groups applications also
with FXS Gateways.
"AddTrunkGroupAsPrefix = 1" can be used when
incoming Tel!IP call should be treated differently
according to received hunt group. If this feature is
enabled the Hunt group ID is added to called number
as a prefix. The number manipulation and routing
(Prefix=) rules will apply to the new destination
number.
Note: When using Trunk groups don't use
"ChannelList" or "Channel2Phone" parameters .