User`s manual

MP-1xx/H.323
MP-1xx/H.323 User’s Manual 40 Document #: LTRT-00651
Other:
" Country Code (0xB5) and Manufacturers Code (0x28) are used in H.323 messages
" Support H.323 Annex D, T.38 real time FAX.
" Supports H.450 Call Hold, Call Transfer and Call Forwarding supplementary services
(H.450.1, H.450.2, H.450.3 and H.450.4).
" Supported codecs: G.711 A-law (5, 10 and 20 msec), G.711 µ-law (5, 10 and 20 msec),
G.723 (5.3 and 6.3 kbps), G.729 (8 kbps, 10 and 20 msec), G.726 (16, 32 kbps, 20 msec),
NetCoder (6.4, 7.2, 8.0 and 8.8 kbps, 20 msec).
" Supports DTMF and HookFlash signal out of band using H.245 channel (using
"Alphanumeric" field).
" Supports DTMF and HookFlash signal out of band using H.225/Q.931 keypad facility
messages
" Support of one or two stage dialing for network to PBX/PSTN calls, using MP-10x/FXO
Gateway.
" Support of collecting Digits from PBX by MP-10x/FXO Gateway.
" Gateway registration with prefixes (applicable to FXO Gateway)
" Reopening of logical channel and implementation of empty terminal capability set.
" Configurable H.323 Port Range.
" H.225/Q.931 Progress Indicator parameter is supported for Fast Connect, enabling playing
of local ringback tone or to cut through the voice channel to listen to remote call progress
tones/messages.
" Supports detection of Caller ID signal (Bellcore and ETSI standards) from PBX line by MP-
10x/FXO Gateway, and interworking it to H.323 network.
For detailed information, refer to the latest MP-1xx/H.323 Release Notes, Document #: LTRT-
00652.