User`s manual

MP-1xx/H.323 User’s Manual 4. Software Installation
Version 4.2 Beta 29 June 2003
4 Software Installation
Note 1: The MP-124 24-port, MP-108 8-port, MP-104 4-port and MP-102 2-port Media Gateways have
similar functionality except for the number of channels (the MP-124 and MP-102 support only
FXS), and all versions are referred to collectively in these release notes as the MP-1xx.
Note 2: MP-10x refers to MP-108 8-port, MP-104 4-port and MP-102 2-port Gateways.
Note 3: MP-1xx/FXS refers only to the MP-124/FXS, MP-108/FXS, MP-104/FXS and MP-102/FXS
Gateways.
Note 4: MP-10x/FXO refers only to MP-108/FXO and MP-104/FXO Gateways.
4.1 Installation Package
The Installation Package includes the following Software and Utilities:
Software:
MP108_ram.cmp - Image Software for download to MP-10x/FXS and MP-10x/FXO
Gateways
MP124_ram.cmp - Image Software for download to MP-124 Gateway
usa_tones.dat - Call progress tones dat file for download
usa_tones.ini - Call progress tones ini file (used to create dat file)
H323gw_FXS.ini - ini example file for FXS MP-1xx Gateways
H323gw_FXO.ini - ini example file for FXO MP-10x Gateways
MP1xx_Coeff_FXS.dat - Telephony interface configuration file for MP-1xx/FXS Gateway
MP10x_Coeff_FXO.dat - Telephony interface configuration file for MP-10x/FXO Gateway
MIB library - Library of SNMP MIBs
Utilities:
ini file utility.xls - Excel™ utility for creation of ini file
TPDMUtil.exe - Call progress tones file generator utility
Bootp_install.exe - AudioCodes BootP & TFTP configuration utility
4.2 MP-1xx Initialization
MP-1xx Gateway comes with pre-installed software. The basic installation can be done using
AudioCodes configuration utility, or from Web browser, such as from Microsoft Internet Explorer.
To change network parameters, use Web browser, AudioCodes BootP & TFTP configuration
utility or use third party BootP server.
For setting the H.323 parameters in the ini file, either edit the ini example file, or generate such a
file using the Excel utility provided.
The ini file and other configuration files can be downloaded directly from the Web browser using
either HTTP protocol, or AudioCodes-provided configuration utility or any standard TFTP server.
The Image software file: ram.cmp is only used for software upgrade.
The Call Progress tone file usa_tones.ini is used to define call progress tone levels and their
frequency. To change the tone’s parameters, first modify the file, and then using “TPDMUtil.exe”