User`s manual

MP-1xx/H.323
MP-1xx/H.323 User’s Manual 18 Document #: LTRT-00651
2.1.2 MP-10x Rack Mounting Installation
Figure 2-1: MP-10x Rack Mounting
The MP-10x is installed into a standard 19-inch rack by the addition of the 2 brackets supplied,
and shown above.
$ To install the MP-10x, take the following steps:
Step 1 Fasten the short bracket to the right-hand side of the MP-10x using the 2 screws
provided, as shown in Figure 2-1, and carefully positioning the peg into a convenient
ventilation hole in the side of the MP-10x box.
Step 2 Fasten the long bracket to the left-hand side of the MP-10x using the 2 screws
provided as shown in Figure 2-1, and carefully positioning the peg into a convenient
ventilation hole in the side of the MP-10x box.
Step 3 Insert the MP-10x into the 19-inch rack and fasten the left-hand and right-hand
brackets to the vertical tracks of the 19-inch rack, using standard 19-inch rack bolts
(not provided).
$ To connect the cables go to Step 4 (Section 2.1.4 on page 19)
2.1.3 MP-10x Desktop Mounting Installation
Figure 2-2: MP-10x Desktop or Shelf
The MP-10x is installed on a desk or shelf without additional brackets as shown above.
$ To connect the cables go to Step 4 (Section 2.1.4 on page 19)