User`s manual

MP-1xx/H.323 User’s Manual 10. Appendices
Version 4.2 Beta 127 June 2003
Appendix D - DHCP Server Configuration
Windows™ NT DHCP Server Configuration in BootP
Compatible (Reserve) Mode
Note: The User needs to install Windows
™
NT4 services pack 4 (or higher) after enabling the DHCP
server service on the NT server. This is required for correct operation with BootP clients.
$ To configure the Windows™ NT DHCP server take the next 16 steps:
After starting the system, DHCP Manager displays the following screen:
Figure 10-5: Scope Menu
1. Select “Add Reservations” from the “Scope” menu; the ‘Add Reserved Clients’ screen
opens.