User`s manual

MP-1xx/H.323
MP-1xx/H.323 User’s Manual 114 Document #: LTRT-00651
A.2 Window Details
A.2.1 Main Window
Figure 10-1: Main Window
Figure 10-1 is the main window of the program. It features several controls, listed below:
Program State - With this button, the User can pause the program. When the program has
paused, no replies to BootP requests are sent.
View Clients Button - This button opens up the Clients Configuration window.
View Templates Button - This button opens up the Templates Configuration window.
Clear Log Button - This buttons clears the log.
Filter Unknown Clients Button - This button filters all BootP requests that are not in the
client configuration list.
Reset Button - This button opens up a dialog box, where the User can enter an IP of a client.
The program sends a reset command to that client.
Edit/Preferences - Selecting “Preferences” from the Edit menu opens the Preferences window
for defining BootP and TFTP parameters.
Log Window - All BootP requests and TFTP sessions are displayed, including the time and date
of the request. In addition, the response type is also displayed:
" “Client Not Found”
" “Client Found”
" “Client’s Mac Changed”
" “Client Disabled”
" “Listed at” (when using the “test selected clients” button).
" For TFTP session, File name and Download status are displayed.