Installation guide
Table Of Contents
- 1. Quick Start
- 2. Installing the MP-1xx
- 3. Configuring the MP-1xx
- 4. Changing the MP-1xx Username and Password
- 5. Restoring and Backing Up the MP-1xx Configuration
- 6. Monitoring the MP-1xx
- 7. Upgrading the MP-1xx
- 8. MP-1xx IP<->PBX Test Example
- 9. Regulatory Information
Fast Track Installation Guide 1. Quick Start
Version 4.6 7 July 2005
1 Quick Start
This Fast Track Installation Guide helps you to set up the MP-1xx gateway for the first time. Prior
knowledge of IP networks is preferred. Refer to Figure
1-1 for the quick setup flow. For detailed
information on how to fully configure the gateway, refer to the MP-1xx User’s Manuals.
Figure
1-1: Required Steps to Install the MP-1xx
Refer to Section 2.3
Refer to Section
2.4
Refer to Section
3.1
Refer to Section
2.1
Refer to Section
3.4