Installation guide
Table Of Contents
- 1. Quick Start
- 2. Installing the MP-1xx
- 3. Configuring the MP-1xx
- 4. Changing the MP-1xx Username and Password
- 5. Restoring and Backing Up the MP-1xx Configuration
- 6. Monitoring the MP-1xx
- 7. Upgrading the MP-1xx
- 8. MP-1xx IP<->PBX Test Example
- 9. Regulatory Information

Fast Track Installation Guide General
Version 4.6 5 July 2005
Tip: When viewing this manual on CD, Web site or on any other electronic copy,
all cross-references are hyperlinked. Click on the page or section numbers
(shown in blue) to reach the individual cross-referenced item directly. To
return back to the point from where you accessed the cross-reference, press
the ALT and ◄ keys.
Trademarks
AC logo, Ardito, AudioCoded, AudioCodes, AudioCodes logo, IPmedia, Mediant, MediaPack, MP-
MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and VoIPerfect, are trademarks or
registered trademarks of AudioCodes Limited. All other products or trademarks are property of
their respective owners.
Customer Support
Customer technical support and service are provided by AudioCodes’ Distributors, Partners, and
Resellers from whom the product was purchased. For Customer support for products purchased
directly from AudioCodes, contact support@audiocodes.com
.
Abbreviations and Terminology
Each abbreviation, unless widely used, is spelled out in full when first used. Only industry-
standard terms are used throughout this manual. Hexadecimal notation is indicated by 0x
preceding the number.
Related Documentation
Document # Manual Name
LTRT-714xx (e.g., LTRT-71401) MediaPack MGCP User’s Manual
LTRT-616xx MP Series Release Notes
LTRT-651xx MediaPack H.323 User’s Manual
LTRT-652xx MediaPack H.323 Analog Gateways Release Notes
LTRT-654xx MediaPack SIP User’s Manual
LTRT-656xx MediaPack & Mediant 1000 SIP Analog Gateways Release Notes
Note 1: MP-1xx refers to the MP-124 24-port, MP-108 8-port, MP-104 4-port and MP-
102 2-port VoIP gateways having similar functionality except for the number of
channels (the MP-124 and MP-102 support only FXS).
Note 2: MP-10x refers to MP-108 8-port, MP-104 4-port and MP-102 2-port
gateways.
Note 3: MP-1xx/FXS refers only to the MP-124/FXS, MP-108/FXS, MP-104/FXS and
MP-102/FXS gateways.
Note 4: MP-10x/FXO refers only to MP-108/FXO and MP-104/FXO gateways.